Preparation,Characterization and Controlled Release Investigation of Biocompatible pH-Sensitive PVA/PAA Hydrogels

In the present research hydrogel films based on polyvinyl alcohol (PVA) and polyacrylic acid (PAA) blend, with various crosslink densities, have been prepared through different thermal treatment. The results of FTIR and DSC confirmed quality and quantity of conclusion on miscibility of PVA/PAA blends, respectively. Besides, biocompatibility of the samples has been proved in cytotoxicity tests using L929 cells, according to ISO10993–5. Water uptake of the hydrogel blends is measured. pH sensitivity properties of blends are studied with and without boiling in NaOH solutions where the effect of swelling in water before boiling has also been investigated. Preswellings in water and NaOH concentration have been found to be mainly effective on pH sensitivity of PVA/PAA blends. Biocompatibility and pH sensitivity behavior make these hydrogels appropriate candidates to orally deliver drugs such as insulin and peptides that can be released in basic pH of intestine. The stability of these films in acidic solutions and its expansion and also the consequent release of drugs in basic solutions have been studied by using Teofilin as a model drug by UV-spectrophotometeric measurements.     

An improvement on the Tracy and Chen model ‘A generalized model for weight restrictions in DEA’

Recently Tracy and Chen presented a parametric DEA model (PDEA) to assess relative efficiency in the presence of a generalized form of linear weight restrictions. This paper proposes a modification to the PDEA model that avoids the need to resort to searching algorithms to estimate efficiency, and assures that the correct efficiency scores are obtained in a single stage using mathematical programming solvers. The results of this model and the results of Tracy and Chen's PDEA model are compared using the examples reported in their paper. The results confirm the superiority of the model proposed in this paper.     

Use of organofunctionalized nanoporous silica gel to improve the lifetime of carbon paste electrode for determination of copper(II) ions

A new functionalized nanoporous silica gel with dipyridyl group (DPNSG) was synthesized. Then, the potentiometric response of the copper(II) ion was investigated at a carbon paste electrode chemically modified with this newly designed functionalized nanoporous silica gel. The electrodes with DPNSG proportions of 15.0% (w/w) demonstrated very stable potentials. Calibration plots with Nernstian slopes for Cu²⁺ were observed, 28.4 (±1.0) mV decade⁻¹, over a wide linear concentration range (1.0 × 10⁻⁷ to 1.0 × 10⁻² M). The electrode exhibited a detection limit of 8.0 × 10⁻⁸ M. Moreover, the selectivity coefficients measured by the match potential method in acetate buffer, pH 5.5, were investigated. The electrode presented a response time of ∼50 s, high performance, high sensitivity in a wide range of cation activities and good long-term stability (more than 9 months). The method was satisfactory and was used to determine the copper ion concentration in waste waters, contaminated by this metal.     

Experimental and quantum chemical study on the IR, UV and electrode potential of 6-(2,3-dihydro-1,3-dioxo-2-phenyl-1H-inden-2-yl)-2,3-dihydroxybenzaldehyde

Electrode potential of 6-(2,3-dihydro-1,3-dioxo-2-phenyl-1H-inden-2-yl)-2,3-dihydroxybenzaldehyde (DPDB) in methanol have been calculated theoretically. For the achievement of this task, the density functional theory (B3LYP/6-31G(d)) was employed with the inclusion of the entropic and thermochemical corrections to yield the free energies of the redox reactions. The electrode potential was also obtained experimentally by means of an electrochemical technique (cyclic voltammetry). The geometric parameters, the vibrational frequency values and the UV spectrum of DPDB and 2-(2,3-dihydro-1,3-dioxo-2-phenyl-1H-inden-2-yl)-5,6-dioxocyclohexa-1,3-dienecarbaldehyde (DPDD is the oxidized form of DPDB), were computed using the same methods. The calculated IR spectrum of DPDB, used for the assignment of the IR frequencies, was observed in the experimental FT-IR spectrum. The correlation between the theoretical and experimental DPDB vibrational frequencies was 0.996. This agreement mutually verified the accuracy of the experimental method and the validity of the applied mathematical model.     

DNA biosensors based on metallo-intercalator probes and electrocatalytic amplification

Strategies for electrochemical sensing of DNA can be classified into label-free and label-based approaches, categories of which include enzyme-, nanomaterial- and redox labels that are attached to DNA either by covalent or non-covalent means. Metallointercalators represent one group of small molecule redox labels that non-covalently enter the groove of a DNA. The metallointercalator plays a dual-role in acting as a structure indicator (for hybridization) and a signal generator. Labeling is not needed, and electrochemical measurements can be carried out in a label-free solution of an electrolyte. However, such metallointercalators lack the option of catalytic signal generation as in the case of enzyme- and nanomaterial-based labels. Therefore, signal amplification becomes crucial. We first survey here recent progress in this area. A signal-amplifying system is presented that relies on the electroatalytic oxidation of a metallointercalator ruthenium(II)bipyridine/phenoxazine complex in the presence of electron donor species such as oxalate, DNA bases, or tripropylamine. Recent work on such DNA sensors is discussed. Results suggest that such metallointercalator-based DNA sensors represent a viable platform for developing high-throughput and automated PCR/lab-on-a-chip devices as well as visualized multifunctional DNA sensors.

Eu(III) macrocyclic complexes promote cleavage of and bind to models for the 5'-cap of mRNA. Effect of pendent group and a second metal ion

The interaction of three Eu(III) macrocyclic complexes Eu(THED)3+, Eu(ATHC)3+, and Eu(ATHC)3+, and Eu(S-THP)3+ with two 5'-cap model compounds, GpppG and m7GpppG is studied (THED = 1,4,7,10-tetrakis(2-hydroxyethyl)-1,4,7,-10-tetraazacyclododecane, ATHC = 1-(carbamoylmethyl)-4,7,10-tris(2-hydroxyethyl)-1,4,7,10- tetraazacyclododecane, S-THP = 1S,4S,7S,10S-tetrakis(2-hydroxypropyl)-1,4,7,10-tetraazacyclododecane). Laser-induced excitation luminescence spectroscopy is used to study the binding of Eu(S-THP)3+ to GpppG (K = 5.9 x 10(4) M-1) and to characterize the Eu(S-THP)-GpppG complex. Both Eu(THED)3+ and Eu(S-THP)3+ bind to m7GpppG as monitored by use of fluorescence spectroscopy with binding constants of 5.9 x 10(3) and 4.4 x 10(4) M-1, respectively. The kinetics of cleavage of GpppG by two macrocyclic complexes is studied. Cleavage of GpppG by Eu(THED)3+ is accelerated by 15-fold in the presence of an equivalent of Zn(NO3)2 at pH 7.3, 37 degrees C, suggesting that two metal ions accelerate the cap cleavage reaction. Eu(ATHC)3+ promotes cleavage of GpppG with a pseudo-first-order rate constant of 2.6 x 10(-5) s-1 at pH 7.3, 37 degrees C, and 0.30 mM complex.     

Comparison of dispersive liquid–liquid microextraction and hollow fiber liquid–liquid–liquid microextraction for the determination of fentanyl,alfentanil, and sufentanil in water and biological fluids by high-performance liquid chromatography

Dispersive liquid–liquid microextraction (DLLME) and hollow fiber liquid–liquid–liquid microextraction (HF-LLLME) combined with HPLC–DAD have been applied for the determination of three narcotic drugs (alfentanil, fentanyl, and sufentanil) in biological samples (human plasma and urine). Different DLLME parameters influencing the extraction efficiency such as type and volume of the extraction solvent and the disperser solvent, concentration of NaOH, and salt addition were investigated. In the HF-LLLME, the effects of important parameters including organic solvent type, concentration of NaOH as donor solution, concentration of H₂SO₄ as acceptor phase, salt addition, stirring rate, temperature, and extraction time were investigated and optimized. The results showed that both extraction methods exhibited good linearity, precision, enrichment factor, and detection limit. Under optimal condition, the limits of detection ranged from 0.4 to 1.9 μg/L and from 1.1 to 2.3 μg/L for DLLME and HF-LLLME, respectively. For DLLME, the intra- and inter-day precisions were 1.7–6.4% and 14.2–15.9%, respectively; and for HF-LLLME were 0.7–5.2% and 3.3–10.1%, respectively. The enrichment factors were from 275 to 325 and 190 to 237 for DLLME and HF-LLLME, respectively. The applicability of the proposed methods was investigated by analyzing biological samples. For analysis of human plasma and urine samples, HF-LLLME showed higher precision, more effective sample clean-up, higher extraction efficiency, lower organic solvent consumption than DLLME.     

Switching of global minima of novel germylenic reactive intermediates via halogens (X): C2GeH2 vs. C2GeHX at ab initio and DFT levels

For 30 C₂GeHX germylenic isomers, one cyclic structure, X-germacyclopropenylidene, and three acyclics are considered, which include: ethynyl-X-germylene, X-vinylidenegermylene, and (X-ethynyl)germylene (X = H, F, Cl, and Br). The global minimum among six isomeric C₂GeH₂ (where X = H), is found to be cyclic, aromatic, singlet germacyclopropenylidene. In contrast, among the 24 corresponding halogermylenes, C₂GeHX (where X = F, Cl, and Br), the global minima switch to acyclic, singlet ethynylhalogermylenes, at eight reasonably high ab initio and DFT levels. The direct resonance interaction between X and the divalent center Ge in the singlet acyclic ethynylhalogermylene structures, is claimed to justify switching of the calculated global minima in the halo derivatives. GIAO-NICS calculations indicate that the X-germacyclopropenylidene isomer is more aromatic for X = H than X = F, Cl, or Br. The angle ∠XGeC bending potential energy curves show the singlet and triplet ethynylgermylene crossing at ≈146°, for X = H.     

Biosurfactant production under extreme environmental conditions by an efficient microbial consortium, ERCPPI-2

The biosurfactant production potential of a new microbial consortium of Enterobacter cloacae and Pseudomonas sp. (ERCPPI-2) which was isolated from heavy crude oil-contaminated soil in the south of Iran, has been investigated under extreme environmental conditions. The isolated consortium produces a biosurfactant mixture with excessive oil spreading and emulsification properties. This consortium was able to grow and produce biosurfactant at temperatures up to 70 °C, pressures up to 6000 psia, salinities up to 15% (w/v), and in the pH range 4-10. Besides, the optimum biosurfactant production conditions were found to be 40 °C and 7.0 for the temperature and pH value, respectively. These conditions gave the best biosurfactant production of 1.74 g/1 when the cells were grown on a minimal salt medium containing 1.0% (w/v) olive oil, 1.0% (w/v) sodium nitrate supplemented with 1.39% (w/v) K(2)HPO(4) at 40 °C and 150 rpm after 48 h of incubation. The ERCPPI-2 could reduce surface and interfacial tensions to 31.7 and 0.65 mN/m from the original values of 58.3 and 16.9 mN/m, respectively. The isolated consortium produced biosurfactant using heavy crude oil as the sole source of carbon and emulsified the available heavy crude oil up to E(24)=83.4%. The results of the core holder flooding tests at simulated reservoir conditions demonstrated that the oil recovery efficiency due to the injection of the cell-free biosurfactant solution was 27.2%, and the bacterium injection reduced the final residual oil saturations to below 3% at optimum conditions.     

Analytical solution for a steady flow of enclosed rotating disks

Low-Reynolds-number flow plays an important role in the centrifugal separation of fluid particles under microgravity conditions and also in micromechanics due to the miniaturization of fluid mechanical parts. In this situation, the governing equations may be simplified. Here an analytical solution is presented for the steady flow of an incompressible viscous fluid between two finite disks enclosed by a cylindrical container for small Reynolds number (Re 10). The general solution is valid for all choices of the aspect ratio () and different cases of disk to cylinder rotation rates (s). An expression for the torque acting on the disk is obtained. The tangential velocity distribution is calculated and presented graphically for different values of ands. Known results in the literature for a single rotating disk and similar problems follow as a particular case of the general solution presented.

---

Zusammenfassung Zahlreiche hydrodynamische Vorgänge unter der Bedingung verminderter Schwerkraft aber auch Vorgänge in der Mikromechanik finden im Bereich kleiner Reynoldszahlen statt. In solchen Situationen können die Bewegungsgleichungen vereinfacht und eventuell analytische Lösungen gefunden werden. In dieser Arbeit wird die stationäre Strömung einer viskosen, inkompressiblen Flüssigkeit für kleine Reynolds- und unterschiedliche Aspektzahlen untersucht. Die Flüssigkeit ist zwischen zwei rotierenden Scheiben und einem zylindrischen Behälter eingeschlossen. Eine analytische Lösung für die Tangentialkomponente des Geschwindigkeitsvektors ist für den allgemeinen Fall, dass die Scheiben und der Behälter unterschiedliche Winkelgeschwindigkeiten besitzen können, dargestellt. Des weiteren wurde eine Beziehung für das Widerstandsmoment der rotierenden Scheibe angegeben. Der Verlauf der Tangentialgeschwindigkeiten für verschiedene Rotations- und Aspektverhältnisse wird graphisch dargestellt und diskutiert. Bereits angegebene Lösungen in der Literatur bezüglich dieser Geometrie können als Sonderfall der hier dargestellten Lösung entwickelt werden.